The organ was originally built by Whiteley of Chester c1886 and was rebuilt with a detached console by Bower of Norwich in 1992

You can donate to our appeal using the Parish Giving Scene by clicking on this link. This can also be gift aided at no extra cost to you.

https://www.parishgiving.org.uk/donors/find-your-parish/bulkington-st-james-warwickshire 

 

General

The organ will be generally dismantled, the pipes and parts of the action will be brought back to the workshop. The organ will be cleaned.

Console

The console will be overhauled. The manual keys will be stripped down and cleaned. New felt will be fitted to the balance and bat pin rails the contacts and wipers will be cleaned and reset. The thumb piston contacts will be cleaned and regulated. The pedalboard will be stripped down and all parts lightly sanded and waxed, new felt will be fitted throughout. The contacts and wipers will be cleaned and movement regulated. The stopkey units will be cleaned and contacts checked, some are a little sluggish to work on the pistons, we will check and lubricate and stiff movements to improve them. The toe pistons will be cleaned and contacts reset. There is some damage to the top and back of the console veneer, probably from water we will replace these with new panels.

Organ_Console.jpeg

Manual chests

The swell and great chests will be overhauled on site. There was very little running in the chests found on my visit. The rackboards, upperboards and slides will be removed and cleaned. All moving surfaces will be re-coated in colloidal graphite. The pallets will be cleaned and the pulldowns oiled and springs checked and tension reset as required. The pulldown magnets will be cleaned and tested. Some of the pipework on the lower octave of the Great Principal is “hissy”, this may be poor fitting upprboards or poor pipework, we will investigate this and hopefully find a cure. The soundboard windscreen type slider motors from Kimber-Allen are now obsolete and spare parts are unobtainable, we will therefore fit new modern design solenoid type motors.

Pedal chests

All magnets and Roosevelt motors will be checked and replaced as required.

Reservoir-Bellows

There is one large double rise bellows, it seems in reasonably good condition, it will be cleaned inside and out with any weak points in the leatherwork made good.

Trunks and conveyances

All trunks and conveyances will be checked for leaks and sealed as required.

Bellows.jpeg

Swellbox and shutters

The swellbox will be cleaned and re-painted inside with white paint. The shutters are rather noisy when worked, this could be loose fittings in the trace rod or a noisy swell engine, we will investigate this and quieten things down, all moving parts will be greased.

Tremulant

The tremulant works well, it will be cleaned and checked over.

Blower

The blower is a discuss unit in good condition. The unit will be cleaned and oiled.

Blower.jpeg

 

Pipework

All of the pipework will be cleaned in our workshop, the metal pipes will be cleaned and any dents rounded out and new tuning slides fitted. The wooden pipes will be checked for splits and loose joints and repaired as required, stoppers will be re-fitted. The reed pipes will be dismantled, tongues and shallots cleaned and polished. All pipes will be voiced in the workshop before refitting. The front pipes will be cleaned. If you would like them re-painted, we will be pleased to supply a price for this work.

Pipework.jpeg

Casework

The casework will be generally cleaned and waxed.

Protective sheeting

A discreet frame will be made to fit above the organ but hidden from view. A permanent heavy duty black plastic sheet will be fitted to the frame.